Testing Standards
Comprehensive Database of 777+ Material Testing Standards
| Standard Code | Standard Description | Year | Material Type | Organization | |
|---|---|---|---|---|---|
| ⚡ ASTM Standards (Main Directory) | |||||
| ASTM A820 | Steel Fibers for Fiber-Reinforced Concrete | 2001 | Steel/Concrete | ASTM | |
| ASTM C203 | Breaking Load and Flexural Properties of Block-Type Thermal Insulation | Insulation | ASTM | ||
| ASTM C307 | Tensile Strength of Chemical-Resistant Mortar, Grout, and Monolithic Surfacings | Mortar/Grout | ASTM | ||
| ASTM C473 | Physical Testing of Gypsum Panel Products | 2019 | Gypsum | ASTM | |
| ASTM C719 | Adhesion and Cohesion of Elastomeric Joint Sealants | 2013/2022 | Sealants | ASTM | Multiple versions |
| ASTM C1305 | Crack Resistance of Insulating Glass Units | 2016 | Glass | ASTM | |
| ASTM C1660 | Evaluation of Flat-Plate Solar Collector Structural Design | Solar Materials | ASTM | ||
| ⚡ ASTM Standards (Subdirectories, from PDFs) | |||||
| ASTM-G-154 | ASTM | ||||
| ASTM-E-4-16 | ASTM | ||||
| ASTM-D732 | ASTM | ||||
| ASTM-D2370-16-2021 | ASTM | ||||
| ASTM-C719-22 | ASTM | ||||
| ASTM-D4776-D4776M-10 | ASTM | ||||
| ASTM-F3014-2014 | ASTM | ||||
| ASTM-F-1874 | ASTM | ||||
| ASTM-E83 | ASTM | ||||
| ASTM-D1321 | ASTM | ||||
| ASTM-D903 | ASTM | ||||
| ASTM-D882 | ASTM | ||||
| ASTM-D751 | ASTM | ||||
| ASTM-D6775 | ASTM | ||||
| ASTM-D6637 | ASTM | ||||
| ASTM-D624 | ASTM | ||||
| ASTM-D5147-D5147M | ASTM | ||||
| ASTM-D4761 | ASTM | ||||
| ASTM-D429-14 | ASTM | ||||
| ASTM-D412-2006 | ASTM | ||||
| ASTM-D4073 | ASTM | ||||
| ASTM-D3410 | ASTM | ||||
| ASTM-D1709 | ASTM | ||||
| ASTM-D1238 | ASTM | ||||
| ASTM-D1238-04c | ASTM | ||||
| ASTM-C719__13 | ASTM | ||||
| ASTM-c473-19 | ASTM | ||||
| ASTM-C1660 | ASTM | ||||
| ASTM-C-1305 | ASTM | ||||
| ASTM-C203 | ASTM | ||||
| ASTM-C1660 | ASTM | ||||
| ASTM-C-1305-16 | ASTM | ||||
| ASTM-A820-01 | ASTM | ||||
| ASTM-370-2020 | ASTM | ||||
| 🇬🇧 BS, 🇮🇳 IS, 🌍 ISO, 🇩🇪 DIN, 🇦🇺 AS, CRD, etc. | |||||
| BS 6319-2 | Testing of Resin and Polymer/Cement Compositions for Use in Construction | Polymers/Cement | BS | ||
| BS 6319-3 | Testing of Resin and Polymer/Cement Compositions for Use in Construction | Polymers/Cement | BS | ||
| BS 5212-3 | Cold Applied Joint Sealant Systems for Concrete Pavements | Sealants | BS | ||
| BS EN 1062-7 | Paints and Varnishes — Coating Materials and Coating Systems for Exterior Masonry | 2015 | Coatings | BS | |
| BS EN 10002-1 | Tensile Testing of Metallic Materials | 2001 | Metals | BS | |
| BS EN 12310-1 | Flexible Sheets for Waterproofing — Determination of Resistance to Tearing (Nail Shank) | Waterproofing | BS | ||
| BS EN 12311-1 | Flexible Sheets for Waterproofing — Determination of Tensile Properties | Waterproofing | BS | ||
| BS EN 12390-8 | Testing Hardened Concrete — Depth of Penetration of Water Under Pressure | 2019 | Concrete | BS | |
| BS EN 12808-3 | Grouts for Tiles — Determination of Flexural and Compressive Strength | 2008 | Grouts | BS | |
| BS EN 13888 | Grouts for Tiles — Requirements, Evaluation of Conformity, Classification and Designation | 2009 | Grouts | BS | |
| BS EN 14695 | Flexible Sheets for Waterproofing — Reinforced Bitumen Sheets | 2010 | Bitumen/Waterproofing | BS | |
| BS EN 14889-1 | Fibres for Concrete — Steel Fibres — Definitions, Specifications and Conformity | Steel/Concrete | BS | ||
| BS ISO 11040-4 | Prefilled Syringes — Requirements and Test Methods for Glass Barrels | 2015 | Medical/Glass | BS | |
| BS ISO 14125 | Fibre-Reinforced Plastic Composites — Determination of Flexural Properties | Composites | BS | ||
| IS 1237 | Cement Concrete Flooring Tiles | 2012 | Concrete/Tiles | IS | |
| IS 1608 | Mechanical Testing of Metals — Tensile Testing | 2005/2022 | Metals | IS | |
| IS 1734.1-20 | Methods of Test for Aggregates for Concrete — Particle Size and Shape | 1983 | Aggregates | IS | |
| IS 1755 | Specification for Clay Building Bricks | 1983 | Clay/Ceramics | IS | |
| IS 2380 | Methods of Test for Aggregates for Concrete — Determination of Soundness | Aggregates | IS | ||
| IS 2645 | Integral Waterproofing Compounds for Cement Mortar and Concrete | 2003 | Concrete/Waterproofing | IS | |
| IS 2770 | Methods of Testing for Natural Building Stones | 2017 | Stone | IS | |
| IS 3400-1 | Methods of Test for Vulcanized Rubbers | 2012 | Rubber | IS | |
| IS 4456.1 | Elastomeric Sealing Gaskets for Joints in Concrete Pipes | 1967 | Elastomers/Sealants | IS | |
| IS 4984 | Adhesives — Methods of Test | 2016 | Adhesives | IS | |
| IS 7016 | Glass Fibre Reinforced Cement Flat Sheets | 2009 | Composites/Cement | IS | |
| IS 9013 | Method of Test for Tar and Bituminous Materials | 1978 | Bitumen/Tar | IS | |
| IS 9537.1 | Concrete Admixtures — Specification | 1980 | Concrete | IS | |
| IS 10258 | Medical Syringes for Single Use | 2023 | Medical/Plastics | IS | |
| IS 12406 | Adhesive for Fixing Ceramic Tiles | 2003 | Adhesives/Ceramics | IS | |
| IS 14443 | Coating and Lining of Concrete Surface with Polymer | 1997 | Polymers/Concrete | IS | |
| IS 14587 | Sprayed Concrete — Guidelines | 1998 | Concrete | IS | |
| IS 15477 | Building Sealants — Guidelines for Selection and Application | 2004/2019 | Sealants | IS | |
| IS 17190 | Tile Grouts | 2020 | Grouts | IS | |
| ISO 37 | Rubber, Vulcanized or Thermoplastic — Determination of Tensile Stress-Strain Properties | Rubber | ISO | ||
| ISO 4587 | Adhesives — Determination of Tensile Lap-Shear Strength of Rigid-to-Rigid Bonded Assemblies | 2003 | Adhesives | ISO | |
| ISO 4624 | Paints and Varnishes — Pull-Off Test for Adhesion | 2016 | Coatings | ISO | |
| ISO 7864 | Sterile Hypodermic Needles for Single Use | 2016 | Medical/Metal | ISO | |
| ISO 7886 | Sterile Hypodermic Syringes for Single Use | Medical/Plastics | ISO | ||
| ISO 10123 | Adhesives — Determination of Shear Strength of Anaerobic Adhesives | 2013 | Adhesives | ISO | |
| ISO 10555-5 | Intravascular Catheters — Sterile and Single-use Catheters — Part 5: Over-needle Peripheral Catheters | 2013 | Medical/Polymers | ISO | |
| ISO 13007-2 | Ceramic Tiles — Grouts and Adhesives | Ceramics/Adhesives | ISO | ||
| ISO 13426-1 | Geotextiles and Geotextile-related Products — Strength of Internal Structural Junctions | 2003 | Geosynthetics | ISO | |
| DIN 53504 | Testing of Rubber — Tensile Test | 2009-10 | Rubber | DIN | |
| AS 4586 | Slip Resistance Classification of New Pedestrian Surface Materials | Surface Materials | AS | ||
| CRD C48 | Test Method for Water Content of Hardened Portland Cement Concrete | Concrete | CRD | ||
| ISO/IEC 17025 | General Requirements for the Competence of Testing and Calibration Laboratories | Laboratory Standards | ISO | ||
| 🌐 Top 200 Global UTM-Relevant Testing Standards | |||||
| ASTM E8/E8M | Standard Test Methods for Tension Testing of Metallic Materials | Metals | ASTM | ||
| ISO 6892-1 | Metallic Materials — Tensile Testing — Part 1: Method of Test at Room Temperature | Metals | ISO | ||
| EN ISO 527-1 | Plastics — Determination of Tensile Properties — Part 1: General Principles | Plastics | EN/ISO | ||
| ASTM D638 | Standard Test Method for Tensile Properties of Plastics | Plastics | ASTM | ||
| ISO 527-2 | Plastics — Determination of Tensile Properties — Part 2: Test Conditions for Molding and Extrusion Plastics | Plastics | ISO | ||
| ASTM D3039 | Standard Test Method for Tensile Properties of Polymer Matrix Composite Materials | Composites | ASTM | ||
| ISO 14125 | Fibre-Reinforced Plastic Composites — Determination of Flexural Properties | Composites | ISO | ||
| ASTM D790 | Standard Test Methods for Flexural Properties of Unreinforced and Reinforced Plastics and Electrical Insulating Materials | Plastics | ASTM | ||
| ISO 178 | Plastics — Determination of Flexural Properties | Plastics | ISO | ||
| ASTM D695 | Standard Test Method for Compressive Properties of Rigid Plastics | Plastics | ASTM | ||
| ISO 604 | Plastics — Determination of Compressive Properties | Plastics | ISO | ||
| ASTM E9 | Standard Test Methods of Compression Testing of Metallic Materials at Room Temperature | Metals | ASTM | ||
| ISO 7438 | Metallic Materials — Bend Test | Metals | ISO | ||
| ASTM D882 | Standard Test Method for Tensile Properties of Thin Plastic Sheeting | Plastics | ASTM | ||
| JIS K 6251 | Rubber, Vulcanized or Thermoplastic — Determination of Tensile Stress-Strain Properties | Rubber | JIS | ||
| EN ISO 6892-1 | Metallic Materials — Tensile Testing — Part 1: Method of Test at Room Temperature | Metals | EN/ISO | ||
| GB/T 228.1 | Metallic Materials — Tensile Testing — Part 1: Method of Test at Room Temperature | Metals | GB | ||
| IS 1608 | Mechanical Testing of Metals — Tensile Testing | Metals | IS | ||
| BS EN ISO 6892-1 | Metallic Materials — Tensile Testing — Part 1: Method of Test at Room Temperature | Metals | BS/EN/ISO | ||
| ASTM D638M | Standard Test Method for Tensile Properties of Plastics (Metric) | Plastics | ASTM | ||
| ISO 527-3 | Plastics — Determination of Tensile Properties — Part 3: Test Conditions for Films and Sheets | Plastics | ISO | ||
| ASTM D882M | Standard Test Method for Tensile Properties of Thin Plastic Sheeting (Metric) | Plastics | ASTM | ||
| ISO 527-4 | Plastics — Determination of Tensile Properties — Part 4: Test Conditions for Isotropic and Orthotropic Fibre-Reinforced Plastic Composites | Composites | ISO | ||
| ASTM D3518 | Standard Test Method for In-Plane Shear Response of Polymer Matrix Composite Materials by Tensile Test of a ±45° Laminate | Composites | ASTM | ||
| ISO 14126 | Fibre-Reinforced Plastic Composites — Determination of Compressive Properties in the In-Plane Direction | Composites | ISO | ||
| ASTM D6641 | Standard Test Method for Compressive Properties of Polymer Matrix Composite Materials Using a Combined Loading Compression (CLC) Test Fixture | Composites | ASTM | ||
| ISO 527-5 | Plastics — Determination of Tensile Properties — Part 5: Test Conditions for Unidirectional Fibre-Reinforced Plastic Composites | Composites | ISO | ||
| ASTM D7264 | Standard Test Method for Flexural Properties of Polymer Matrix Composite Materials | Composites | ASTM | ||
| ISO 527-6 | Plastics — Determination of Tensile Properties — Part 6: Test Conditions for Isotropic and Orthotropic Fibre-Reinforced Plastic Composites | Composites | ISO | ||
| ASTM D2344 | Standard Test Method for Short-Beam Strength of Polymer Matrix Composite Materials and Their Laminates | Composites | ASTM | ||
| ISO 527-7 | Plastics — Determination of Tensile Properties — Part 7: Test Conditions for Isotropic and Orthotropic Fibre-Reinforced Plastic Composites | Composites | ISO | ||
| ASTM D412 | Standard Test Methods for Vulcanized Rubber and Thermoplastic Elastomers – Tension | Rubber | ASTM | ||
| ISO 37 | Rubber, Vulcanized or Thermoplastic — Determination of Tensile Stress-Strain Properties | Rubber | ISO | ||
| ASTM D624 | Standard Test Method for Tear Strength of Conventional Vulcanized Rubber and Thermoplastic Elastomers | Rubber | ASTM | ||
| ISO 34-1 | Rubber, Vulcanized or Thermoplastic — Determination of Tear Strength — Part 1: Trouser, Angle and Crescent Test Pieces | Rubber | ISO | ||
| ASTM D4073 | Standard Test Method for Compression Set Under Constant Deflection in Air | Rubber | ASTM | ||
| ISO 815-1 | Rubber, Vulcanized or Thermoplastic — Determination of Compression Set — Part 1: At Ambient or Elevated Temperatures | Rubber | ISO | ||
| ASTM D1002 | Standard Test Method for Apparent Shear Strength of Single-Lap-Joint Adhesively Bonded Metal Specimens by Tension Loading | Adhesives | ASTM | ||
| ISO 4587 | Adhesives — Determination of Tensile Lap-Shear Strength of Rigid-to-Rigid Bonded Assemblies | Adhesives | ISO | ||
| ASTM D903 | Standard Test Method for Peel or Stripping Strength of Adhesive Bonds | Adhesives | ASTM | ||
| ISO 8510-1 | Adhesives — Peel Test for a Flexible-Bonded-to-Rigid Test Specimen — Part 1: 90° Peel | Adhesives | ISO | ||
| ASTM C1341 | Standard Test Method for Flexural Properties of Continuous Fiber-Reinforced Advanced Ceramic Composites | Ceramics | ASTM | ||
| ISO 15733 | Fine Ceramics — Test Method for Flexural Strength of Monolithic Ceramics at Room Temperature | Ceramics | ISO | ||
| ASTM C1161 | Standard Test Method for Flexural Strength of Advanced Ceramics at Ambient Temperature | Ceramics | ASTM | ||
| JIS R 1601 | Testing Methods for Flexural Strength (Modulus of Rupture) of Fine Ceramics at Room Temperature | Ceramics | JIS | ||
| ASTM C1273 | Standard Test Method for Tensile Strength of Monolithic Advanced Ceramics at Ambient Temperatures | Ceramics | ASTM | ||
| ISO 15732 | Fine Ceramics — Test Method for Tensile Strength of Monolithic Ceramics at Room Temperature | Ceramics | ISO | ||
| ASTM D5379 | Standard Test Method for Shear Properties of Composite Materials by the V-Notched Beam Method | Composites | ASTM | ||
| ISO 14130 | Fibre-Reinforced Plastic Composites — Determination of Apparent Interlaminar Shear Strength by Short-Beam Method | Composites | ISO | ||
| ASTM D5528 | Standard Test Method for Mode I Interlaminar Fracture Toughness of Unidirectional Fiber-Reinforced Polymer Matrix Composites | Composites | ASTM | ||
| ISO 15024 | Fibre-Reinforced Plastic Composites — Determination of Mode I Interlaminar Fracture Toughness, GIC, for Unidirectionally Reinforced Materials | Composites | ISO | ||
| ASTM D7905 | Standard Test Method for Determination of the Mode II Interlaminar Fracture Toughness of Unidirectional Fiber-Reinforced Polymer Matrix Composites | Composites | ASTM | ||
| ISO 15114 | Fibre-Reinforced Plastic Composites — Determination of the Mode II Fracture Resistance for Interlaminar Fracture Toughness, GIIC | Composites | ISO | ||
| ASTM D5045 | Standard Test Methods for Plane-Strain Fracture Toughness and Strain Energy Release Rate of Plastic Materials | Plastics | ASTM | ||
| ISO 13586 | Plastics — Determination of Fracture Toughness (GIC and KIC) — Linear Elastic Fracture Mechanics (LEFM) Approach | Plastics | ISO | ||
| ASTM D6110 | Standard Test Method for Determining the Charpy Impact Resistance of Notched Specimens of Plastics | Plastics | ASTM | ||
| ISO 179-1 | Plastics — Determination of Charpy Impact Properties — Part 1: Non-Instrumented Impact Test | Plastics | ISO | ||
| ASTM D256 | Standard Test Methods for Determining the Izod Pendulum Impact Resistance of Plastics | Plastics | ASTM | ||
| ISO 180 | Plastics — Determination of Izod Impact Strength | Plastics | ISO | ||
| ASTM E399 | Standard Test Method for Linear-Elastic Plane-Strain Fracture Toughness KIC of Metallic Materials | Metals | ASTM | ||
| ISO 12135 | Metallic Materials — Unified Method of Test for the Determination of Quasistatic Fracture Toughness | Metals | ISO | ||
| ASTM E1820 | Standard Test Method for Measurement of Fracture Toughness | Metals | ASTM | ||
| ISO 12737 | Metallic Materials — Determination of Plane-Strain Fracture Toughness | Metals | ISO | ||
| ASTM E1290 | Standard Test Method for Crack-Tip Opening Displacement (CTOD) Fracture Toughness Measurement | Metals | ASTM | ||
| BS 7448-1 | Fracture Mechanics Toughness Tests — Part 1: Method for Determination of KIC, Critical CTOD and Critical J Values of Metallic Materials | Metals | BS | ||
| ASTM C1421 | Standard Test Methods for Determination of Fracture Toughness of Advanced Ceramics at Ambient Temperature | Ceramics | ASTM | ||
| ISO 18756 | Fine Ceramics — Determination of Fracture Toughness of Monolithic Ceramics at Room Temperature by the Surface Crack in Flexure (SCF) Method | Ceramics | ISO | ||
| ASTM D6637 | Standard Test Method for Determining Tensile Properties of Geogrids by the Single or Multi-Rib Tensile Method | Geosynthetics | ASTM | ||
| ISO 10319 | Geosynthetics — Wide-Width Tensile Test | Geosynthetics | ISO | ||
| ASTM D4595 | Standard Test Method for Tensile Properties of Geotextiles by the Wide-Width Strip Method | Geosynthetics | ASTM | ||
| ISO 13426-1 | Geotextiles and Geotextile-Related Products — Strength of Internal Structural Junctions — Part 1: Geocells | Geosynthetics | ISO | ||
| ASTM D5035 | Standard Test Method for Breaking Force and Elongation of Textile Fabrics (Strip Method) | Textiles | ASTM | ||
| ISO 13934-1 | Textiles — Tensile Properties of Fabrics — Part 1: Determination of Maximum Force and Elongation at Maximum Force Using the Strip Method | Textiles | ISO | ||
| ASTM D5034 | Standard Test Method for Breaking Strength and Elongation of Textile Fabrics (Grab Test) | Textiles | ASTM | ||
| ISO 13934-2 | Textiles — Tensile Properties of Fabrics — Part 2: Determination of Maximum Force Using the Grab Method | Textiles | ISO | ||
| ASTM D2261 | Standard Test Method for Tearing Strength of Fabrics by the Tongue (Single Rip) Method | Textiles | ASTM | ||
| ISO 13937-1 | Textiles — Tear Properties of Fabrics — Part 1: Determination of Tear Force Using Ballistic Pendulum Method (Elmendorf) | Textiles | ISO | ||
| ASTM D751 | Standard Test Methods for Coated Fabrics | Textiles | ASTM | ||
| ISO 1421 | Rubber- or Plastics-Coated Fabrics — Determination of Tensile Strength and Elongation at Break | Textiles | ISO | ||
| ASTM D6775 | Standard Test Method for Breaking Strength and Elongation of Textile Webbing, Tape, and Braided Material | Textiles | ASTM | ||
| EN 12195-2 | Load Restraining on Road Vehicles — Safety — Part 2: Web Lashing Made from Man-Made Fibres | Textiles | EN | ||
| ASTM F88 | Standard Test Method for Seal Strength of Flexible Barrier Materials | Packaging | ASTM | ||
| ASTM F1140 | Standard Test Methods for Climbing and Mountaineering Equipment | Sports Equipment | ASTM | ||
| EN 564 | Mountaineering Equipment — Accessory Cord — Safety Requirements and Test Methods | Sports Equipment | EN | ||
| ASTM D4761 | Standard Test Methods for Mechanical Properties of Lumber and Wood-Base Structural Material | Wood | ASTM | ||
| ISO 3133 | Wood — Determination of Ultimate Strength in Static Bending | Wood | ISO | ||
| ASTM D143 | Standard Test Methods for Small Clear Specimens of Timber | Wood | ASTM | ||
| EN 408 | Timber Structures — Structural Timber and Glued Laminated Timber — Determination of Some Physical and Mechanical Properties | Wood | EN | ||
| ASTM D7031 | Standard Guide for Evaluating Mechanical and Physical Properties of Wood-Plastic Composite Products | Wood-Plastic Composites | ASTM | ||
| ISO 527-8 | Plastics — Determination of Tensile Properties — Part 8: Test Conditions for Isotropic and Orthotropic Fibre-Reinforced Plastic Composites | Composites | ISO | ||
| ASTM D7791 | Standard Test Method for Uniaxial Fatigue Properties of Plastics | Plastics | ASTM | ||
| ISO 13003 | Fibre-Reinforced Plastics — Determination of Fatigue Properties Under Cyclic Loading Conditions | Composites | ISO | ||
| ASTM D7791 | Standard Test Method for Uniaxial Fatigue Properties of Plastics | Plastics | ASTM | ||
| JIS K 7083 | Carbon Fibre Reinforced Plastics — Determination of Tensile Properties | Composites | JIS | ||
| GB/T 1040.1 | Plastics — Determination of Tensile Properties — Part 1: General Principles | Plastics | GB | ||
| GB/T 1040.2 | Plastics — Determination of Tensile Properties — Part 2: Test Conditions for Moulding and Extrusion Plastics | Plastics | GB | ||
| GB/T 1040.3 | Plastics — Determination of Tensile Properties — Part 3: Test Conditions for Films and Sheets | Plastics | GB | ||
| GB/T 1040.4 | Plastics — Determination of Tensile Properties — Part 4: Test Conditions for Isotropic and Orthotropic Fibre-Reinforced Plastic Composites | Composites | GB | ||
| GB/T 1040.5 | Plastics — Determination of Tensile Properties — Part 5: Test Conditions for Unidirectional Fibre-Reinforced Plastic Composites | Composites | GB | ||
| GB/T 9341 | Plastics — Determination of Flexural Properties | Plastics | GB | ||
| GB/T 1041 | Plastics — Determination of Compressive Properties | Plastics | GB | ||
| GB/T 228.2 | Metallic Materials — Tensile Testing — Part 2: Method of Test at Elevated Temperature | Metals | GB | ||
| GB/T 232 | Metallic Materials — Bend Test | Metals | GB | ||
| JIS Z 2241 | Metallic Materials — Tensile Testing — Method of Test at Room Temperature | Metals | JIS | ||
| JIS Z 2242 | Method of Tensile Test for Metallic Materials at Elevated Temperature | Metals | JIS | ||
| JIS Z 2248 | Method of Bend Test for Metallic Materials | Metals | JIS | ||
| JIS K 7161 | Plastics — Determination of Tensile Properties — Part 1: General Principles | Plastics | JIS | ||
| JIS K 7162 | Plastics — Determination of Tensile Properties — Part 2: Test Conditions for Moulding and Extrusion Plastics | Plastics | JIS | ||
| JIS K 7171 | Plastics — Determination of Flexural Properties | Plastics | JIS | ||
| JIS K 7181 | Plastics — Determination of Compressive Properties | Plastics | JIS | ||
| DIN EN ISO 527-1 | Plastics — Determination of Tensile Properties — Part 1: General Principles | Plastics | DIN | ||
| DIN EN ISO 178 | Plastics — Determination of Flexural Properties | Plastics | DIN | ||
| DIN EN ISO 604 | Plastics — Determination of Compressive Properties | Plastics | DIN | ||
| DIN EN ISO 6892-1 | Metallic Materials — Tensile Testing — Part 1: Method of Test at Room Temperature | Metals | DIN | ||
| DIN 53455 | Testing of Plastics — Tensile Test | Plastics | DIN | ||
| DIN 53452 | Testing of Plastics — Compression Test | Plastics | DIN | ||
| DIN 53435 | Testing of Plastics — Bending Test | Plastics | DIN | ||
| DIN EN 10002-1 | Metallic Materials — Tensile Testing — Part 1: Method of Test at Room Temperature | Metals | DIN | ||
| ASTM E111 | Standard Test Method for Young’s Modulus, Tangent Modulus, and Chord Modulus | Metals | ASTM | ||
| ISO 6892-2 | Metallic Materials — Tensile Testing — Part 2: Method of Test at Elevated Temperature | Metals | ISO | ||
| ASTM E8M | Standard Test Methods for Tension Testing of Metallic Materials (Metric) | Metals | ASTM | ||
| ASTM E21 | Standard Test Methods for Elevated Temperature Tension Tests of Metallic Materials | Metals | ASTM | ||
| ISO 6892-3 | Metallic Materials — Tensile Testing — Part 3: Method of Test at Low Temperature | Metals | ISO | ||
| ASTM A370 | Standard Test Methods and Definitions for Mechanical Testing of Steel Products | Steel | ASTM | ||
| EN 10025-2 | Hot Rolled Products of Structural Steels — Part 2: Technical Delivery Conditions for Non-Alloy Structural Steels | Steel | EN | ||
| ASTM B557 | Standard Test Methods for Tension Testing Wrought and Cast Aluminum- and Magnesium-Alloy Products | Aluminum | ASTM | ||
| ISO 6892-4 | Metallic Materials — Tensile Testing — Part 4: Method of Test in Liquid Helium | Metals | ISO | ||
| ASTM D7565 | Standard Test Method for Determining Tensile Properties of Fiber Reinforced Polymer Matrix Composites Used for Strengthening of Civil Structures | Composites | ASTM | ||
| ASTM D7617 | Standard Test Method for Determining Shear Properties of Fiber Reinforced Polymer Matrix Composites Used for Strengthening of Civil Structures | Composites | ASTM | ||
| ISO 20507 | Fine Ceramics — Elastic Modulus Test for Continuous Fiber-Reinforced Ceramic Matrix Composites at Room Temperature | Ceramic Composites | ISO | ||
| ASTM C1358 | Standard Test Method for Monotonic Tensile Strength Testing of Continuous Fiber-Reinforced Advanced Ceramics with Solid Rectangular Cross-Section Test Specimens at Ambient Temperature | Ceramic Composites | ASTM | ||
| JIS R 1606 | Test Methods for Tensile Strength of Continuous Fiber Reinforced Ceramic Matrix Composites at Room Temperature | Ceramic Composites | JIS | ||
| ASTM C1292 | Standard Test Method for Shear Strength of Continuous Fiber-Reinforced Advanced Ceramics at Ambient Temperatures | Ceramic Composites | ASTM | ||
| ISO 20323 | Fine Ceramics — Mechanical Properties of Ceramic Composites at Ambient Temperature — Determination of Tensile Properties | Ceramic Composites | ISO | ||
| ASTM C1359 | Standard Test Method for Monotonic Tensile Behavior of Continuous Fiber-Reinforced Advanced Ceramics with Solid Rectangular Cross Sections at Elevated Temperature | Ceramic Composites | ASTM | ||
| ASTM C1360 | Standard Practice for Constant-Amplitude, Axial, Tension-Tension Cyclic Loading of Continuous Fiber-Reinforced Advanced Ceramics at Ambient Temperatures | Ceramic Composites | ASTM | ||
| ISO 20337 | Fine Ceramics — Test Method for Flexural Strength of Continuous Fiber-Reinforced Ceramic Matrix Composites at Room Temperature | Ceramic Composites | ISO | ||
| ASTM C1557 | Standard Test Method for Tensile Strength and Young’s Modulus of Fibers | Fibers | ASTM | ||
| ISO 11566 | Carbon Fibres — Determination of the Tensile Properties of Single-Filament Specimens | Carbon Fibers | ISO | ||
| JIS R 7601 | Testing Methods for Carbon Fibres | Carbon Fibers | JIS | ||
| ASTM D3379 | Standard Test Method for Tensile Strength and Young’s Modulus for High-Modulus Single-Filament Materials | Fibers | ASTM | ||
| ISO 5079 | Textile Fibres — Determination of Breaking Force and Elongation at Break of Individual Fibres | Textile Fibers | ISO | ||
| ASTM D3822 | Standard Test Method for Tensile Properties of Single Textile Fibers | Textile Fibers | ASTM | ||
| EN 1465 | Adhesives — Determination of Tensile Lap-Shear Strength of Bonded Assemblies | Adhesives | EN | ||
| EN 15870 | Adhesives — Determination of Tensile Strength of Butt Joints | Adhesives | EN | ||
| EN 14869-2 | Structural Adhesives — Determination of Shear Behaviour of Structural Bonds — Part 2: Thick Adherend Shear Test | Adhesives | EN | ||
| ASTM D5868 | Standard Test Method for Lap Shear Adhesion for Fiber Reinforced Plastic (FRP) Bonding | Adhesives | ASTM | ||
| ISO 11003-1 | Adhesives — Determination of Shear Behaviour of Structural Bonds — Part 1: Torsion Shear Test Method | Adhesives | ISO | ||
| ASTM D5656 | Standard Test Method for Thick-Adherend Metal Lap-Shear Joints for Determination of the Stress-Strain Behavior of Adhesives in Shear by Tension Loading | Adhesives | ASTM | ||
| ISO 11003-2 | Adhesives — Determination of Shear Behaviour of Structural Bonds — Part 2: Thick-Adherend Tensile-Test Method | Adhesives | ISO | ||
| ASTM D6862 | Standard Test Method for 90 Degree Peel Resistance of Adhesives | Adhesives | ASTM | ||
| ISO 8510-2 | Adhesives — Peel Test for a Flexible-Bonded-to-Rigid Test Specimen — Part 2: 180° Peel | Adhesives | ISO | ||
| ASTM D1876 | Standard Test Method for Peel Resistance of Adhesives (T-Peel Test) | Adhesives | ASTM | ||
| EN 28510-1 | Adhesives — Peel Test for a Flexible-Bonded-to-Rigid Test Specimen — Part 1: 90° Peel | Adhesives | EN | ||
| ASTM D6464 | Standard Test Method for Determining the Short-Term Reduction in Strength of Geotextiles after Exposure to Ultraviolet Light | Geosynthetics | ASTM | ||
| ISO 12236 | Geosynthetics — Static Puncture Test (CBR Test) | Geosynthetics | ISO | ||
| ASTM D6241 | Standard Test Method for Static Puncture Strength of Geotextiles and Geotextile-Related Products Using a 50-mm Probe | Geosynthetics | ASTM | ||
| ISO 12957-1 | Geosynthetics — Determination of Friction Characteristics — Part 1: Direct Shear Test | Geosynthetics | ISO | ||
| ASTM D5321 | Standard Test Method for Determining the Shear Strength of Soil-Geosynthetic and Geosynthetic-Geosynthetic Interfaces by Direct Shear | Geosynthetics | ASTM | ||
| ISO 10722 | Geosynthetics — Index Test Procedure for the Evaluation of Mechanical Damage under Repeated Loading — Damage Caused by Granular Material | Geosynthetics | ISO | ||
| ASTM D5818 | Standard Practice for Obtaining Samples for Characterization of Waste | Geosynthetics | ASTM | ||
| ISO 13438 | Geotextiles and Geotextile-Related Products — Screening Test Method for Determining the Resistance to Oxidation | Geosynthetics | ISO | ||
| ASTM D4885 | Standard Test Method for Determining Performance Strength of Geomembranes by the Wide Strip Tensile Method | Geomembranes | ASTM | ||
| ISO 10319 | Geosynthetics — Wide-Width Tensile Test | Geosynthetics | ISO | ||
| ASTM D5397 | Standard Test Method for Evaluation of Stress Crack Resistance of Polyolefin Geomembranes Using Notched Constant Tensile Load Test | Geomembranes | ASTM | ||
| ISO 16321 | Eye and Face Protection — Vocabulary | Safety Equipment | ISO | ||
| EN 166 | Personal Eye-Protection — Specifications | Safety Equipment | EN | ||
| ANSI Z87.1 | Occupational and Educational Personal Eye and Face Protection Devices | Safety Equipment | ANSI | ||
| ASTM F2878 | Standard Test Method for Measuring Stitch or Seam Strength of Textiles Used in Industrial Laundry Applications | Textiles | ASTM | ||
| EN ISO 13935-2 | Textiles — Seam Tensile Properties of Fabrics and Made-up Textile Articles — Part 2: Determination of Maximum Force to Seam Rupture Using the Grab Method | Textiles | EN/ISO | ||
| ASTM F1306 | Standard Test Method for Slow Rate Penetration Resistance of Flexible Barrier Films and Laminates | Packaging | ASTM | ||
| ASTM F1249 | Standard Test Method for Water Vapor Transmission Rate Through Plastic Film and Sheeting Using a Modulated Infrared Sensor | Packaging | ASTM | ||
| ISO 15105-1 | Plastics — Film and Sheeting — Determination of Gas-Transmission Rate — Part 1: Differential-Pressure Method | Plastics | ISO | ||
| ASTM D1894 | Standard Test Method for Static and Kinetic Coefficients of Friction of Plastic Film and Sheeting | Plastics | ASTM | ||
| ISO 8295 | Plastics — Film and Sheeting — Determination of the Coefficients of Friction | Plastics | ISO | ||
| ASTM D2209 | Standard Test Method for Tensile Properties of Cellular Plastics | Cellular Plastics | ASTM | ||
| ISO 1926 | Rigid Cellular Plastics — Determination of Tensile Properties | Cellular Plastics | ISO | ||
| ASTM D1621 | Standard Test Method for Compressive Properties of Rigid Cellular Plastics | Cellular Plastics | ASTM | ||
| ISO 844 | Rigid Cellular Plastics — Determination of Compression Properties | Cellular Plastics | ISO | ||
| ASTM D1623 | Standard Test Method for Tensile and Tensile Adhesion Properties of Rigid Cellular Plastics | Cellular Plastics | ASTM | ||
| ISO 1922 | Rigid Cellular Plastics — Determination of Shear Strength | Cellular Plastics | ISO | ||
| ASTM C273 | Standard Test Method for Shear Properties of Sandwich Core Materials | Sandwich Materials | ASTM | ||
| ASTM C364 | Standard Test Method for Edgewise Compressive Strength of Sandwich Constructions | Sandwich Materials | ASTM | ||
| ASTM C393 | Standard Test Method for Core Shear Properties of Sandwich Constructions by Beam Flexure | Sandwich Materials | ASTM | ||
| ISO 1922 | Rigid Cellular Plastics — Determination of Shear Strength | Cellular Plastics | ISO | ||